how to change your shower head

How To Change a Shower Head 2022

Replacing an old shower head with a new one is a simple way to update your bathroom without having to spend hours remodelling it.

How often do you change your shower heads? If you don’t, then you should consider changing them at least once every year or two. Showerheads can get really expensive over time, especially if they start leaking water.

Changing your shower head isn’t always fun, but it’s important to do it regularly. The average person uses their shower head for 2 years before replacing it. This means that you’ll save money if you replace your shower head now instead of waiting until it breaks down completely.

After a long day at work, showers may be relaxing, but they also need some upkeep. You can take care of most issues related to showers by doing some simple maintenance tasks.

Learn how to change a shower head

How to change a shower head 2022

How To Change a Shower Head 2022

How to change a shower head

A shower head is an important part of your bathroom and can make or break the look of your space. If you’re looking to update your bathroom, then it may be time for a new head. There are many different types of showerheads available on the market today. Some are more expensive than others, but they all have their own benefits.

Changing a Shower Head in Easy Steps

How To Change a Shower Head 2022

When updating your kitchen, bathroom, living room, etc., there’s always an opportunity to improve upon something that has been used often for years.

Upgrading the showering experience can improve everyone’s mood, even if they don’t use one every day. It may be easy for some people but not everyone has the skills needed to install a head properly. Make sure you take the time to get everything right before moving forward.

Remove the old shower head.

how to change a shower head and handle

To begin this changing shower head project, you’ll need to know how to take apart an existing showerhead. If you’re having trouble removing an old showerhead fixture from its mounting bracket, turn the fixture clockwise.

If it doesn’t move at first, use a cloth or towel to help get it moving.  Wrap the towel around the shower arm, use slip-joint plier grips to hold the end of the pipe so you don’t accidentally pull off any part of the plumbing when you’re wrapping it up. Next, put the grips under the bottom edge of the head and twist slightly so that it slides out without breaking anything.

Clean the shower arm thoroughly

how to change a shower head

Since there may be some rust, scale, or other debris leftovers after cleaning out your old showerhead, wipe down both sides of the arm using the cloth. Not only will clearing out the debris help improve the flow rate of your shower heads, but it will also simplify the installation process.

Install the replacement shower head

Depending on which kind of replacement shower head you choose, there may be different steps involved in replacing them. A standard wall-mounted showerhead might be easier to install than some others but they’re not always the best option for every bathroom. Here is an overview for installing a showerhead by type:

Standard wall mount.

Most often the cheapest and simplest to attach, the wall mount shower head usually needs to be screwed into place. To secure the new showerhead onto its mounting bracket, simply turn it counterclockwise until it clicks into position. Make sure to read through the entire manual before using the product for the first time.

Top mount.

You can replace a showerhead using the same method whether it’s mounted at the bottom or top of the wall. It’s always better to get professional advice before starting any project.

Handheld.

Handheld showerheads come in different shapes and sizes. Some can be used instead of a regular bathtub spout; some can even replace an existing showerhead! They usually aren’t too difficult to set up.

First, turn off the water supply at the tap or shower. Then, disconnect the old shower head from its mounting bracket by turning counterclockwise. Next, attach the new shower head to its mounting bracket using the supplied screws. Finally, reconnect the end of the shower hoses to their respective outlets.

Read through any additional instructions before trying out anything new.

Sliding bar.

A fixed shower head usually comes with an integrated handheld nozzle attached directly to the end of a rigid pipe which extends from the top of the fixture down into the water stream. To connect the showerhead to the water supply line, install the bar first. Hollow wall anchors usually allow for easy installation in showers.

 Inspect your work and check for leaks

If there’s anything wrong with your faucet before you start showering, don’t just ignore it; fix it so you won’t wastewater. Once the new shower head has been installed, wait until after the water has run through the pipes and check for leaks. If you notice any leaks when you’re trying to remove the old sealant, stop immediately; otherwise, you’ll end up damaging the new sealant. Once you’ve dried out the head, use some more Plumbers tape to keep everything together. Tightly securing it to the arm and testing it again.

Quick Installation Instructions

  1. Check out the old showerhead. Rust may be present on the connection between the water supply line and the faucet itself. You’ll need to remove it using an abrasive material such as sandpaper before installing the new fixture. It’ll be easier to remove the old one now.
  2. Remove the old showerhead. Turn it clockwise by hand first. You may be able to remove the showerhead if you wrap it up tightly with a towel and then use pliers to grab hold of it. If it doesn’t move at first, spray some 3in1 oil to help loosen it up a little.
  3. After removing the old showerhead, clean off any remaining rusty minerals, sealant, or tape from the shower arm threads using a wire brush if your new shower head needs it.
  4. Wrap fresh plumber’s tape counterclockwise around the threads of your shower arm, pressing it down firmly until it sticks. Wrap the tape only as high as the threading is or else there’ll be too much exposed tape showing.
  5. Screw on the new shower head.
  6. Check if there are any leaks before turning on the faucet. If the connection leaks, wrap the threads again with plumber’s tape and then tightly secure them using an adjustable wrench.

Clonclusion

It is important to maintain your showerhead clean to keep it functioning properly. When you change a showerhead, take the opportunity to clean the one you are replacing and make sure that you replace it with a model that is fulfilling as well.

In conclusion, there is no doubt that showerheads have made our lives so much easier and cleaner. So, thank heavens for them.

About 70% of the population in the United States bathes at least once per day. (cnet.com)

Need Help Changing Your Showe Head? Contact Us At  https://www.localhandymanhome.com/dublin/handyman-dublin/ for a Quick & Helpful Service

Shower
water spray. Domestic showers can have a single shower head, multiple shower heads, handheld shower head(s) or other variations, all which may be adjustable